Linksys PAP2 Series

Linksys PAP2/PAP2T:




STEP 1

You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and
dial: (four asterisks)
then dial: 110 #


and you will be told the IP address of your device (e.g. 192.168.0.1).



STEP 2
Go to any browser equipped computer on your network and enter the address:

http://192.168.X.X

(where IP ADDRESS is replaced by the address that was given to you in STEP 1)


STEP 3
Click on the "Admin Login" button near the top right side of the screen, then click on the "Line 1" tab.





STEP 4

You need to modify your account information into the Linksys

Proxy: sip.nettalk.com
Display Name: Enter your full name, or account number.

User ID: Enter the SIP User provided on CONNECT
Password: Enter the password provided on CONNECT
Register Expires: 300




STEP 5

Click on the "Save Settings " button at the bottom of the form.

Updated on: 09/14/2020