> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.ntconnect.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Cisco SPA112

Cisco SPA112:


![Cisco SPA112](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_14fepq7.png)



STEP 1

You must first determine what IP address is assigned to your Cisco SPA112. To do this, you need to pick up the phone attached to the Line 1 jack and
dial:   **** (four asterisks)
then dial:  110 #


and you will be told the IP address of your device (e.g. 192.168.0.100).

-

STEP 2
Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.

-
STEP 3
Click on the "Quick Setup" button near the top left side of the screen.


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_vo5lhk.png)

-

STEP 4

You need to modify from the factory default. Settings needed:

Proxy:  	sip.nettalk.com
Display Name:  	Enter your full name, User ID or leave blank
User ID:  	Account Number provided on CONNECT
Password:  	Account SIP Password provided on CONNECT


![SIP configuation](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1v4vls9.png)

-

STEP 5

Click "Submit" at the bottom to save your changes. You will see the following screen:


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_145rvz0.png)