> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.ntconnect.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Gigaset C530 IP

Gigaset C530 IP:


![Gigaset C530 IP](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_16tlg62.png)


STEP 1

You need to obtain the IP address of the base station. You can get this information from your handset by selecting:

Menu→Settings→Base→Local Network→(enter your system pin – default is 0000).

-

STEP 2

Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1).

-

STEP 3

Go to Settings -> Telephony -> Connections -> IP1

You will need to configure the following information from factory default:

Authentication Name: Account Number provided on CONNECT
Authentication Password: Account SIP Password provided on CONNECT
Username: Account Number provided on CONNECT
Display Name: Your name, Account Number, or leave blank

Domain: sip.nettalk.com
Proxy Server Port: 5060
Registration Server: sip.nettalk.com
Registration Server Port: 5060
Registration Refresh Time: 300

STUN Enabled: NO
Outbound Proxy Mode: Auto
Outbound Server Address: sip.nettalk.com
Outbound Proxy Port: 5060


![SIP Configuration](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_7f1nf9.png)

![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1doa1fa.png)

STEP 4

Set your new account settings. Under IP1 you should see "Registered" and "Active" checked off. 


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1g5v7m3.png)

STEP 5 (optional)

If you have multiple NT Connect accounts, repeat STEP 3 for IP2-IP6. Use SIP Ports 5085 or 7060 if additional accounts do not work on 5060.