> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.ntconnect.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Grandstream BudgeTone 101 & 102

Grandstream BudgeTone 101, 102:


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_p0jiws.png)

STEP 1

First determine what IP address it received. To do this, press the menu button, then the down arrow next to it until the display shows:

         [2] IP Addr

Now, press the menu button again and you will be shown the IP address of your device (e.g. 192.168.0.100)


-


STEP 2
Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.


-

STEP 3
You will be prompted to enter a password, the default is "admin", then click the "Login" button. 

-

STEP 4

You need to modify a few parameters from the factory default. 

SIP Server: sip.nettalk.com
SIP User ID: Account Number provided on CONNECT
Authenticate ID: Account Number provided on CONNECT
Authenticate Password: Account Password provided on CONNECT
Name: Use account number, name or leave blank


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_16644el.png)

SIP Registration: YES


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_lu9h59.png)

NAT Traversal: NO


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1vg2rhg.png)

SEND DTMF: via RTP (via SIP Info if you have DTMF  tone issues)


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_vt8wbh.png)

-

STEP 5 

Click on the "Update" button at the bottom of the form. 


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_bz2zl.png)

You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".

-

STEP 6 


Click on the "Reboot" button at the bottom of the form.


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_jmfhle.png)