> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.ntconnect.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Linksys PAP2 Series

Linksys PAP2/PAP2T:


![PAP2](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1pmucmh.png)

STEP 1

You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and
dial:   **** (four asterisks)
then dial:  110 #


and you will be told the IP address of your device (e.g. 192.168.0.1).



STEP 2
Go to any browser equipped computer on your network and enter the address:

http://192.168.X.X

(where IP ADDRESS is replaced by the address that was given to you in STEP 1)


STEP 3
Click on the "Admin Login" button near the top right side of the screen, then click on the "Line 1" tab.


![Linksys LIne 1](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_qmnw6c.png)


STEP 4

You need to modify your account information into the Linksys

Proxy:  	sip.nettalk.com
Display Name:  	Enter your full name, or account number.

User ID:  	Enter the SIP User provided on CONNECT
Password:  	Enter the password provided on CONNECT
Register Expires:  	300


![SIP Info](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_bkt43t.png)

STEP 5

Click on the "Save Settings " button at the bottom of the form.


![Save](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1t7e8f8.png)