> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.ntconnect.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Sipura SPA2XXX & SPA3XXX Series

Sipura SPA2000, SPA2002, SPA2100, SPA3000, SPA3001:

![Sipura SPA2000](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_102wy4x.png)

![Sipura SPA2100](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_mis652.png)

![Sipura SPA3000](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_5d698o.png)


STEP 1

You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and

dial:   ****  (four asterisks)
then dial:   110 #

and you will be told the IP address of your device
(e.g. 192.168.0.100)

-

STEP 2
Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1).


-

STEP 3
Click on the "Admin Login" button near the top right side of the screen, then click on the
"Line 1" tab.


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1gwoylw.png)


![](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_1iaonr4.png)

-

STEP 4
You need to modify from the factory default. Settings are listed here:

Proxy: sip.nettalk.com
Display Name: Enter your full name, User ID or leave blank
User ID: Account Number provided on CONNECT
Password: Account SIP Password provided on CONNECT
Register Expires: 300
Preferred Codec: G711 or G729 will work


![SIP Configuration](https://storage.crisp.chat/users/helpdesk/website/309e8a0a07431600/image_r1f5un.png)