Grandstream BudgeTone 101 & 102

Grandstream BudgeTone 101, 102:

STEP 1

First determine what IP address it received. To do this, press the menu button, then the down arrow next to it until the display shows:

[2] IP Addr

Now, press the menu button again and you will be shown the IP address of your device (e.g. 192.168.0.100)

STEP 2

Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.

STEP 3

You will be prompted to enter a password, the default is "admin", then click the "Login" button.

STEP 4

You need to modify a few parameters from the factory default.

SIP User ID: Account Number provided on CONNECT

Authenticate ID: Account Number provided on CONNECT

Authenticate Password: Account Password provided on CONNECT

Name: Use account number, name or leave blank

SIP Registration: YES

NAT Traversal: NO

SEND DTMF: via RTP (via SIP Info if you have DTMF tone issues)

STEP 5

Click on the "Update" button at the bottom of the form.

You will be brought to a confirmation screen on which you will click on the only option available: "Click to view your changes".

STEP 6

Click on the "Reboot" button at the bottom of the form.

Updated on: 09/15/2020

Was this article helpful?

Thank you!