Grandstream GXP 2000 & GXV3000

Grandstream GXP2000, GXV3000:

STEP 1

You must first determine what IP address it received. To do this, press the round menu button, then the down arrow next to it until the display shows:

[2] IP Addr

Now, press the round menu button again and you will be shown the IP address of your device (e.g. 192.168.0.100)

Note: The GXV3000 shows the IP address on boot-up on the video display.

-

STEP 2
Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.

-

STEP 3
You will be prompted to enter a password (the default is "admin"); then click the "Login" button.

-

STEP 4

Click on “Account 1” to configure your first line.

SIP Server: sip.nettalk.com
SIP User ID: Account Number provided on CONNECT
Authenticate Password: Account Password provided on CONNECT
User ID is phone number: NO
Unregister on reboot: NO
SIP Registration: YES
SIP Port: 5060
Register Expiration: 5 (if in minutes, if in seconds please use 300)
Send DTMF: via RTP (RFC2833) however via SIP may work as well.

c.png)

-

STEP 5

Click on the "Update" button at the bottom of the form.

-

STEP 6 (Optional)

If you have a secondary NT Connect account, repeat STEP 4 for Account 2 or 3. May have to use secondary SIP port 5085 or 7060 for secondary accounts.

STEP 7 (Optional)

You can select Reboot to restart your Grandstream system.

Updated on: 01/05/2024